As an Amazon Associate I earn from qualifying purchases.
Look spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the center of the pedal and an eccentric rotation creating a shock on each rotation. The keo classic 3 spindle is made up of an oversized steel axle with miniature ball bearings 12 mm inside x 18 mm outside and a needle bearing cartridge for improved wear resistance.
LOOK #ad - It is for these reasons that keo blade carbon is the unanimous choice of many champions who have made it a weapon of choice in the conquest of their greatest achievements. The spindle of the new carbon blade has been completely redesigned. Its new design completely integrates the blade for unrivaled aerodynamics.
The platform of the carbon blade is fitted with a 67mm-wide stainless steel plate, optimizing the cleat/pedal contact areas, regardless of pedaling angle. It is available in three tension release levels: 12, the Blade Carbon is available in a Ti version titanium spindle that weighs a mere 95g per pedal, 16 and 20 Equipped with a carbon body and blade, or in a CrMo version chromoly spindle for a weight of 110g per pedal.
It is built around an oversized axle and spindle that passes through internal roller and needle bearings located directly under the pedal platform. Lightweight, aerodynamic, powerful, the new keo blade carbon has all the assets to allow you to improve and optimize your performance until victory is yours. This new construction saves approximately 2 watts at 100 rpm.
LOOK #ad - Increasing the pedals usable contact surface, without any additional weight gain, improves the Power to Weight ratio, making the product even better and allowing you to perform at your best. This creates a feeling of unrivaled comfort not found in any other pedal.
Look also sought to optimize power transfer thanks to its new 500 mm of usable surface +25% increase. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedaling. The spindle profile of the new keo 2 max has also been optimized.
The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot depending upon the angular float you use, the same amount of contact for consistent performance. The look design team has completely remodeled the shape of the KEO 2 MAX, slimmed down line yet a wider contact surface, giving it a new, increasing its style and efficiency. The contact surface of the new keo 2 max preserves the strong lines on which its history was built.
LOOK #ad - Built around an oversized chromoly plus steel axle, located under the contact surface, it is composed of an axle with an inner ball bearing and a needle roller bearing, to handle the load and distribute it optimally. The contact surface of the new keo 2 max preserves the strong lines on which its history was built.
The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot depending upon the angular float you use, the same amount of contact for consistent performance.
The spindle profile of the new keo 2 max has also been optimized. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedaling. Increasing the pedals usable contact surface, improves the Power to Weight ratio, without any additional weight gain, making the product even better and allowing you to perform at your best. Look also sought to optimize power transfer thanks to its new 500 mm of usable surface +25% increase.
LOOK #ad - Look spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the center of the pedal and an eccentric rotation creating a shock on each rotation. A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals.
Look axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation which creates stress on each revolution.
Simple to use, it is possible to adjustment the cleat entry/release tension to low for an easy clip out. This is equivalent to a sprint by andre greipel of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210 . A spacer is used to hold the needle bearing cartridge in place.
LOOK #ad - Simply the best power-to-weight ratio on the road pedal market today. Ceramic bearings for those marginal gains, approved by Romain Bardet.
LOOK #ad - It is for these reasons that keo blade carbon ceramic is the unanimous choice of many champions who have made it a weapon of choice in the conquest of their greatest achievements. Equipped with a carbon body and blade, the Blade Carbon Ceramic is available in a CrMo version chromoly spindle for a weight of 110g per pedal.
Its new design completely integrates the blade for unrivaled aerodynamics. The balls are precisely calibrated one by one by a machine, with the result that every bearing has a totally unique structure. Every component, down to the micrometer.
The platform of the carbon blade ceramic is fitted with a 67mm-wide stainless steel plate, optimizing the cleat/pedal contact areas, regardless of pedaling angle. It is available in three tension release levels: 12, 16 and 20 They are then ordered according to size in perfectly-adapted rings, every ball is meticulously selected to ensure the highest level of quality and performance. Lightweight, powerful, aerodynamic, the new keo blade carbon ceramic has all the assets to allow you to improve and optimize your performance until victory is yours.
LOOK #ad - This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support. These zones give the user a constant and stable feeling of being securely clip-ped in, forces are significantly different from those encountered when dry, in all conditions.
The mechanism works regardless of external conditions in the mud, more space allows for the shedding of various foreign matter mud, sand. Spd compatible. On the other hand, the greater the contact surface, the greater the contact surface, to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused.
An adjustable tension screw al-lows you to fine-tune the entry/release resistance to your perso-nal skill level. This task allowed look to engineer a pedal with the best weight / contact surface ratio on the market. Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. The challenge faced by their engineers was therefore, the more efficiently energy is transferred.
1. LOOK
#adBlack, LOOK Keo Classic 3 Road Pedals
#adLOOK #ad - Its large and wide contact surface provides excellent pedaling stability. Simple to use, it is possible to adjustment the cleat entry/release tension to low for an easy clip out. This is equivalent to a sprint by andre greipel of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210 A new method of fitting the spindle into the pedal body also ensures the prolonged reliability of our pedals.More information #ad
A spacer is used to hold the needle bearing cartridge in place. Look axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation which creates stress on each revolution. Look spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the center of the pedal and an eccentric rotation creating a shock on each rotation. The keo classic 3 spindle is made up of an oversized steel axle with miniature ball bearings 12 mm inside x 18 mm outside and a needle bearing cartridge for improved wear resistance.
| Brand | LOOK #ad |
| Manufacturer | Look #ad |
| Height | 11.81 Inches |
| Length | 11.81 Inches |
| Weight | 0.09 Pounds |
| Width | 11.81 Inches |
| Part Number | PEKC14260 |
| Model | PEKC14260 |
| Warranty | One-year extended warranty |
More information #ad
2. LOOK
#adLOOK Keo Blade Carbon/Composite Road Pedals, Black
#adThe platform of the carbon blade is fitted with a 67mm-wide stainless steel plate, optimizing the cleat/pedal contact areas, regardless of pedaling angle. It is available in three tension release levels: 12, the Blade Carbon is available in a Ti version titanium spindle that weighs a mere 95g per pedal, 16 and 20 Equipped with a carbon body and blade, or in a CrMo version chromoly spindle for a weight of 110g per pedal.
More information #ad
Using a carbon body lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer. It is built around an oversized axle and spindle that passes through internal roller and needle bearings located directly under the pedal platform. Lightweight, aerodynamic, powerful, the new keo blade carbon has all the assets to allow you to improve and optimize your performance until victory is yours. This new construction saves approximately 2 watts at 100 rpm.
| Brand | LOOK #ad |
| Manufacturer | LOOK #ad |
| Height | 5 Inches |
| Length | 2 Inches |
| Weight | 0.09 Pounds |
| Width | 3 Inches |
| Part Number | 23407 |
| Model | PEKBC23407 |
More information #ad
3. LOOK
#adLOOK Keo 2 Max Road Pedals, Black
#adLook also sought to optimize power transfer thanks to its new 500 mm of usable surface +25% increase. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedaling. The spindle profile of the new keo 2 max has also been optimized.
More information #ad
Built around an oversized chromoly plus steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot depending upon the angular float you use, the same amount of contact for consistent performance. The look design team has completely remodeled the shape of the KEO 2 MAX, slimmed down line yet a wider contact surface, giving it a new, increasing its style and efficiency. The contact surface of the new keo 2 max preserves the strong lines on which its history was built.
| Brand | LOOK #ad |
| Manufacturer | Look #ad |
| Height | 5 Inches |
| Length | 2 Inches |
| Weight | 0.09 Pounds |
| Width | 3 Inches |
| Part Number | PEK2M16079 |
| Model | PEK2M16079 |
More information #ad
4. LOOK
#adBlack, LOOK Keo 2 Max Carbon Road Pedals
#adThe shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot depending upon the angular float you use, the same amount of contact for consistent performance.
More information #ad
The look design team has completely remodeled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency. This creates a feeling of unrivaled comfort not found in any other pedal. The spindle profile of the new keo 2 max has also been optimized. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedaling. Increasing the pedals usable contact surface, improves the Power to Weight ratio, without any additional weight gain, making the product even better and allowing you to perform at your best. Look also sought to optimize power transfer thanks to its new 500 mm of usable surface +25% increase.
| Brand | LOOK #ad |
| Manufacturer | LOOK #ad |
| Height | 1.97 Inches |
| Length | 3.94 Inches |
| Weight | 0.53 Pounds |
| Width | 3.94 Inches |
| Part Number | 16090 |
| Model | PEK2M16090 |
More information #ad
5. LOOK
#adLOOK Keo Sprint Pedal
#adLOOK #ad - Built with spring technology, it is possible to adjust the tension between 8 and 12 for a safe entry/release. To increase its durability, efficient, Keo Sprint pedals are reliable, leisure and new riders, the platform surface is reinforced with a stainless-steel plate that gives it exceptional longevity.More information #ad
Designed for occasional, and extremely durable.| Brand | LOOK #ad |
| Manufacturer | Look #ad |
| Height | 1.97 Inches |
| Length | 3.94 Inches |
| Weight | 0.62 Pounds |
| Width | 3.94 Inches |
| Part Number | PEKSP12798 |
| Model | PEKSP12798 |
More information #ad
6. LOOK
#adBlack, LOOK Keo Classic 3 Plus Road Pedals
#adLook axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation which creates stress on each revolution.
More information #ad
Its large and wide contact surface provides excellent pedaling stability. The keo classic 3 spindle is made up of an oversized steel axle with miniature ball bearings 12 mm inside x 18 mm outside and a needle bearing cartridge for improved wear resistance. Simple to use, it is possible to adjustment the cleat entry/release tension to low for an easy clip out. This is equivalent to a sprint by andre greipel of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210 . A spacer is used to hold the needle bearing cartridge in place.
| Brand | LOOK #ad |
| Manufacturer | Look #ad |
| Height | 5 Inches |
| Length | 2 Inches |
| Weight | 0.09 Pounds |
| Width | 3 Inches |
| Part Number | 22256 |
| Model | classic plus 3 |
| Warranty | One-year extended warranty |
More information #ad
7. LOOK
#adLook Keo Grip Road Bicycle Cleats Red, 9 Degree Float
#adLOOK #ad - Standard three-hole Look mounting system, includes hardware. Large support area, and position memory system not compatible with all shoes.More information #ad
| Brand | LOOK #ad |
| Manufacturer | Look #ad |
| Height | 0.6 Inches |
| Length | 5.3 Inches |
| Weight | 0.18 Pounds |
| Width | 4.7 Inches |
| Part Number | 00008152 |
| Model | SG_B00PA3TYPO_US |
More information #ad
8. LOOK
#adLOOK Keo Blade Carbon Ceramic TI Road Pedals, Black
#adMore information #ad
Spindle material: Titanium, Body material: Carbon. Extreme lightness: Barely 95 grams in your hand, almost unnoticeable underfoot. Pedal: 95g, weight pair + cleats: 260g.| Brand | LOOK #ad |
| Manufacturer | LOOK #ad |
| Height | 4 Inches |
| Length | 4 Inches |
| Weight | 0.4 Pounds |
| Width | 4 Inches |
| Part Number | 22008 |
| Model | PEKBCCT22008 |
More information #ad
9. LOOK
#adBlack 12, LOOK Keo Blade Carbon CR Ceramic Road Pedals
#adIts new design completely integrates the blade for unrivaled aerodynamics. The balls are precisely calibrated one by one by a machine, with the result that every bearing has a totally unique structure. Every component, down to the micrometer.
More information #ad
The spindle of the new carbon blade ceramic has been completely redesigned. This new construction saves approximately 2 watts at 100 rpm. It is built around an oversized axle and spindle that passes through internal roller and ceramic bearings located directly under the pedal platform. The platform of the carbon blade ceramic is fitted with a 67mm-wide stainless steel plate, optimizing the cleat/pedal contact areas, regardless of pedaling angle. It is available in three tension release levels: 12, 16 and 20 They are then ordered according to size in perfectly-adapted rings, every ball is meticulously selected to ensure the highest level of quality and performance. Lightweight, powerful, aerodynamic, the new keo blade carbon ceramic has all the assets to allow you to improve and optimize your performance until victory is yours.
| Brand | LOOK #ad |
| Manufacturer | LOOK #ad |
| Height | 2 Inches |
| Length | 4.8 Inches |
| Weight | 0.09 Pounds |
| Width | 8.1 Inches |
| Part Number | 22007 |
| Model | PEKBCC22007 |
More information #ad
10. LOOK
#adBlack, LOOK X-Track Race Carbon Ti Mountain Pedals
#adThe mechanism works regardless of external conditions in the mud, more space allows for the shedding of various foreign matter mud, sand. Spd compatible. On the other hand, the greater the contact surface, the greater the contact surface, to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused.
More information #ad
Generally speaking, the more the pedal will weigh. An adjustable tension screw al-lows you to fine-tune the entry/release resistance to your perso-nal skill level. This task allowed look to engineer a pedal with the best weight / contact surface ratio on the market. Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. The challenge faced by their engineers was therefore, the more efficiently energy is transferred.
| Brand | LOOK #ad |
| Manufacturer | LOOK #ad |
| Height | 2 Inches |
| Length | 9 Inches |
| Weight | 0.09 Pounds |
| Width | 5 Inches |
| Part Number | 18224 |
| Model | PEXT18224 |
More information #ad
