As an Amazon Associate I earn from qualifying purchases.


Updated motion detection allows you to get even quicker activity reports. Security first: this sensor is equipped with the latest s2 authenticated security and signal encryption.
New z-wave chip for better performance. Will it work with my hub? this sensor is not supported by wink, or other z-wave alarm panels. Customize it: choose from 7 levels of motion sensitivity, adjust the motion clear delay time, and pick from 3 different LED indicator modes your hub needs to support advanced parameter input.



Also it is built-in low battery indicator to check battery life easily. Also perfect glassbreak warning for your house, apartment, office, RV, garage, dorm, hotel and so on.
130db loud window alarm: ainoora glass break alarms will sound a 130db alarm continuously for 30 seconds and red indicator will also blink after detect vibration or shock waves associated with glass shattering. Working indicator and low battery warning: The indicator light will flash for 5 seconds after turn on the alarm.

New version 2. 0 comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Custom device handler needed for SmartThings go to Zooz support portal or contact seller for instructions. Outdoor sensor: introducing the first z-wave motion detector created for outdoor use.
Motion detection up to 20 feet. Security: equipped with the latest authenticated s2 security protocol for encrypted signal and hacker-proof smart home NOTE: your Z-Wave hub needs to support S2 for this feature to work. Tamper protection and low battery alerts for your peace of mind. Monitor activity remotely through your Z-Wave hub required, sold separately and automate outdoor lighting based on motion.
1. Ecolink
#ad
Ecolink Zwave Plus Flood & Freeze Sensor, White FLF-ZWAVE5-ECO
#adEcolink #ad - Advanced technology and precision: Easily to install sensor with 36in probe to quickly detect leak under sinks, behind refrigerators etc. Freeze sensor: it triggers at 41◦f 5◦c to notify you before a pipe freeze condition occurs or use it to tell your Z-wave thermostat to turn on/up the heat.More information #ad
Ecolink: ecolink is a leading developer of low power, including a wide range of intelligent wireless security, highly reliable wireless solutions, sensing and home automation devices. Battery life: five year battery life on one CR123A lithium battery. Before they turn into expensive repairs.Brand | Ecolink #ad |
Manufacturer | Ecolink 28617953415 #ad |
Height | 0.93 Inches |
Length | 3.35 Inches |
Weight | 0.14 Pounds |
Width | 0.97 Inches |
Part Number | FLF-ZWAVE5-ECO |
Model | FLF-ZWAVE5-ECO |
Warranty | 2 Year |
More information #ad
2. Jasco
#ad
35257, Jasco, Paintable Plus Smart Door Sensor Color Accessory Pack for GE Enbrighten Z-Wave Model 32563, Cover
#adJasco #ad - Versatile - compatible with GE-branded and Jasco Z-Wave door sensors. Customize - paintable to match any door and décor. Matches dÉcor - removable to allow multiple changes – additional colors available black, ivory.More information #ad
Application - direct fit for z-wave Hinge Pin Smart Door Sensors 32562 and 32563. Easy installation - Three-piece design installs easily to color match main parts of the sensor.Brand | Jasco #ad |
Manufacturer | Jasco Products Company, LLC #ad |
Height | 4 Inches |
Length | 0.87 Inches |
Width | 1.13 Inches |
Part Number | 35257 |
Model | 35257 |
More information #ad
3. ZOOZ
#ad
Zooz 700 Series Z-Wave Plus 4-in-1 Sensor ZSE40 Motion / Light / Temperature / Humidity
#adZOOZ #ad - 4 smart sensors in 1: this compact device detects and reports motion, humidity, temperature, and light level to your smart home app. Compatible Z-Wave hub required, sold separately. New 700 series version: the included cr123a battery makes the sensor lasts much longer than any previous version.Updated motion detection allows you to get even quicker activity reports. Security first: this sensor is equipped with the latest s2 authenticated security and signal encryption.
More information #ad
Supports smartstart inclusion with a unique identifying PIN and QR code. It's z-wave plus 2 certified to ensure it complies with the highest industry standards. It will work great with open systems like Hubitat, HomeSeer, Home Assistant, Vivint, ADT Pulse, Qolsys, and compatible with SmartThings Hub. New z-wave chip for better performance. Will it work with my hub? this sensor is not supported by wink, or other z-wave alarm panels. Customize it: choose from 7 levels of motion sensitivity, adjust the motion clear delay time, and pick from 3 different LED indicator modes your hub needs to support advanced parameter input.
Brand | ZOOZ #ad |
Manufacturer | ZOOZ #ad |
Weight | 0.02 Pounds |
Part Number | ZSE40 |
Model | 4336302850 |
More information #ad
4. 2gig
#ad
2gig GD00Z-5 Z-Wave Garage Opener Door Contact Sensor, Black
#ad2gig #ad - Easy to install and use. Add z-wave control to your current garage door opener. Go control z-wave products provide up to 100 feet range between the wireless controller and/or the closest Z-wave device. Nortek security & control/go control has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.More information #ad
Of z-wave products. Compatible with virtually any automatic garage opener w-section garage door. Linear z-wave products provide up to 100 feet range between the wireless controller and/or the closest Z-wave device.Brand | 2gig #ad |
Manufacturer | 2gig #ad |
Height | 5.2 Inches |
Length | 7.5 Inches |
Weight | 1 Pounds |
Width | 1.8 Inches |
Part Number | GD00Z-5 |
Model | GD00Z-5 |
Warranty | 1 year manufacturer warranty against defects |
More information #ad
5. Ring
#ad
Certified Refurbished Ring Alarm Contact Sensor 2nd Gen – 2-pack
#adRing #ad - Easy installation with no tools required. Includes two 3V CR2032 batteries. Mounts to door and window frames. Now smaller to enable increased placement options. Get instant mobile alerts when doors and windows open in your home.More information #ad
Requires the Ring Alarm Base Station. A certified refurbished ring alarm contact Sensor is refurbished, tested, and certified to look and work like new and comes with the same limited warranty as a new device.Brand | Ring #ad |
Manufacturer | Ring #ad |
Height | 0.55 Inches |
Length | 2.09 Inches |
Weight | 0.04 Pounds |
Width | 1.56 Inches |
Part Number | 53-026267 |
Model | 5AT3S2 |
More information #ad
6. AINOORA
#ad
130DB Loud Window Vibration Alarms, Glass Break Sensor 4 Pack, Burglar Intruder Entry Detector for Indoor Home Office Apartment & RV Security
#adAINOORA #ad - Easy installation: by simple peel and stick the alarm on any window or glass as includes double sided tape! No wiring needed! No screws needed! For your safety: ideal window alarms for your safety to deter intruder thief entry and alert of a potential break-in and scare away burglars.Also it is built-in low battery indicator to check battery life easily. Also perfect glassbreak warning for your house, apartment, office, RV, garage, dorm, hotel and so on.
More information #ad
Ultra slim design: includes four glass break sensors, each with 2 adjustable settings ON/OFF, each dimension Size: 2. 6" x 2. 1" x 03”, each with 3 x lr44 batteries included with 1 year stand-by time. 130db loud window alarm: ainoora glass break alarms will sound a 130db alarm continuously for 30 seconds and red indicator will also blink after detect vibration or shock waves associated with glass shattering. Working indicator and low battery warning: The indicator light will flash for 5 seconds after turn on the alarm.
Brand | AINOORA #ad |
Manufacturer | Ainoora #ad |
Height | 0.3 Inches |
Length | 2.6 Inches |
Width | 2.1 Inches |
Part Number | Window Alarm Sensor |
Model | Window Alarm Sensor |
More information #ad
7. ZOOZ
#ad
Zooz Z-Wave Plus S2 Outdoor Motion Sensor ZSE29
#adZOOZ #ad - Compatibility: the sensor works great on homeseer, and vera. Alexa is not a z-wave hub the sensor won't work directly with Echo. Power it with batteries included or micro USB cable + adapter sold separately. Just ask! Program motion time-out and light level trigger by turning the knobs right on the sensor.New version 2. 0 comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Custom device handler needed for SmartThings go to Zooz support portal or contact seller for instructions. Outdoor sensor: introducing the first z-wave motion detector created for outdoor use.
More information #ad
Easy to install: add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Does not work with wink, ring, fibaro, ADT, Hubitat, or other Z-Wave alarm panels. Support: questions or issues? zooz has fast and responsive US-based support to help you with set-up, functionality, and automation routines. Motion detection up to 20 feet. Security: equipped with the latest authenticated s2 security protocol for encrypted signal and hacker-proof smart home NOTE: your Z-Wave hub needs to support S2 for this feature to work. Tamper protection and low battery alerts for your peace of mind. Monitor activity remotely through your Z-Wave hub required, sold separately and automate outdoor lighting based on motion.
Brand | ZOOZ #ad |
Manufacturer | Zooz #ad |
Weight | 0.82 Pounds |
Part Number | ZSE29 |
More information #ad