As an Amazon Associate I earn from qualifying purchases.
Supplying Demand #ad - 24vac indicator light | Short circuit protection | Magnetic case for job-site convenience. 24 inch leads | weighs 5. 5 oz. Gives a "go / no go" Result | No batteries required.
Genteq #ad - Instructions for operating the TECMate can be found in the included ECM Service Guide. Low cost and easy to use, Detects and isolates motor failures from other HVAC system failures. Supersedes / replaces: 08500 tecmate, tol-2057, ga447, johnstone supply s58-935, tol02057, protech pd510009, tol-2588, tol2057, tol02588, pd510009, tecmate, s1-02642203000, tecmate pro, tol2588, mars 08500, and others.
DUOYI #ad - In addition, and quickly find the location of the disconnection, the phase meter can also judge whether there is a fault in the line, thus helping you to repair the line quickly and easily. Multifunctional non-contact phase sequence detectorthe 3 phase tester is designed to detect the three-phase sequence in motor installation and maintenance, motor steering detection, phaseloss judgment, voltage detection, etc. Non-contact inductive measurementthe 3 phase rotation tester is different from the traditional phase sequence detection method, just clamp the three super-induction and high-insulation clamps on the insulation sheath of the three-phase live wire to detect the phase sequence, it adopts a clamp-shaped non-contact inductive measurement, and no need to open the wire, avoiding contact with the high-voltage bare live wire, which greatly improves the personal safety of the operator.
Just place the meter on the motor and parallel to the motor rotation axis to test the steering of the motor. In addition, which can be put into the handbag after use, which is convenient for carrying and storage. It has multi-functions such as phase sequence inspection, live wire inspection, and is a good helper for easy motor detection. Phase sequence/phaseloss detectionthe non-contact phase sequence detector can detect the phase sequence status positive phase sequence/negative phase sequence of the three-phase power supply and judge the phaseloss.
Trane #ad - Commonly found in the following xv95 two stage vs gas furnaces units: auh2c100a9v5vac, AUH2C100A9V5VBA, tuh2c100a9V5VAC, TUH2C100A9V5VBA. Programmed module to the Model # / Part # Shown. Variable speed / custom programmed…no programming required and very easy to install! replaces / supersedes: mod01905, mod-2367, mod1905, mod-1905, mod2367, mod02367, md525p17~_UH2C100A9V5VAC and others.
Trane #ad - Plug & play Replacement Module. Programmed module to the Model # / Part # Shown. Eon, electronic Motor Control Module. Variable speed / custom programmed…no programming requirED and VERY EASY TO INSTALL! 1-year Warranty.
1. Supplying Demand
#adSupplying Demand ECMPRO Universal ECM Tester for Electronically Commutated Motors 24 Inch Leads Includes Carrying Case
#adMore information #ad
Provides functional test for virtually all types of Electronically Commutated Motors on the market. Sd products come in Supplying Demand packaging. Operating voltage: 24VAC.| Brand | Supplying Demand #ad |
| Manufacturer | Supplying Demand #ad |
| Height | 2 Inches |
| Length | 54 Inches |
| Weight | 0.34 Pounds |
| Width | 2 Inches |
| Part Number | SDECMPRO |
| Model | SDECMPRO |
More information #ad
2. Genteq
#adGenteq ECM Service Tool, S1-02642203000
#adMore information #ad
Test basic settings of fan-only, Cooling, Heating, Dehumidify & Variable Speed. Works with genteq motor models such as: 2. 0, 2. 3, and 3. 0 .| Brand | Genteq #ad |
| Manufacturer | Genteq #ad |
| Weight | 1 Pounds |
| Part Number | TecMate_2 |
| Model | TecMate_2 |
More information #ad
3. DUOYI
#ad3 Phase Rotation Tester Non Contact Voltage Tester Phase Sequence Detector Short Detection 70V~600V AC Phase Rotation Meter Motor Rotation Tester with 0.6m Cable Length,Carrying Bag Phase Meter
#adMore information #ad
When the a, b and c phase indicators are all on, the l indicator light is on for negative phase, the R indicator light is on to indicate positive phase, and when any of the three phases is missing, the corresponding indicator light is not on. Live wire inspection & line maintenancethe non-contact phase meter can detect whether the wire is live, if the tested wire is lack of power, b, the corresponding A, if the wire under test is energized in the live wire voltage setting Within the range of AC70~600V, B, clamp any one of the three-color induction clamps to the wire to be detected, C phase indicator lights will be on. Just place the meter on the motor and parallel to the motor rotation axis to test the steering of the motor. In addition, which can be put into the handbag after use, which is convenient for carrying and storage. It has multi-functions such as phase sequence inspection, live wire inspection, and is a good helper for easy motor detection. Phase sequence/phaseloss detectionthe non-contact phase sequence detector can detect the phase sequence status positive phase sequence/negative phase sequence of the three-phase power supply and judge the phaseloss.
| Brand | DUOYI #ad |
| Manufacturer | DUOYI #ad |
| Weight | 1 Pounds |
| Part Number | Phase Meter-0102 |
| Model | Phase Meter-0102 |
More information #ad
4. Trane
#adGE Genteq 2.3 ECM Module Only 1 HP 5SME39SL0253 D341314P03 39L2901 with Warranty
#adMore information #ad
Plug & play Replacement Module. For ecm surge protector, see link - https://www. Amazon. Com/dp/b009ax6mly?ref=myi_title_dp.| Brand | Trane #ad |
| Manufacturer | Trane #ad |
| Weight | 10 Pounds |
| Part Number | MOD02175-124 |
| Model | MOD02175-124 |
More information #ad
5. Zebra Instruments
#adZebra Instruments, VZPRO ECM Motor Protector Surge Protection for 120-240V GE & GENTEQ 5-PIN ECM Motors
#adZebra Instruments #ad - Product type: Precision Measuring. Package dimensions: 5. 1 cms l x 7. 2 cms w x 21. 2 cms H. Package quantity: 1. Country of Origin: United States.More information #ad
| Brand | Zebra Instruments #ad |
| Manufacturer | Zebra Instruments #ad |
| Height | 9.02 Inches |
| Length | 0.98 Inches |
| Weight | 0.06 Pounds |
| Width | 2.99 Inches |
| Part Number | VZPRO |
| Model | LYSB009AX6MLY-CMPTRACCS |
More information #ad
6. Extech
#adExtech 480403 Motor Rotation and 3-Phase Tester, Multicolor
#adExtech #ad - Package dimensions: 25. 654 l x 7. 366 h x 13. 716 w centimeters. Commercial brand: Etch. Package weight: 1. 23 pounds. Imported from: China.More information #ad
| Brand | Extech #ad |
| Manufacturer | Extech #ad |
| Height | 5.1 Inches |
| Length | 2.7 Inches |
| Weight | 0.04 Pounds |
| Width | 1.25 Inches |
| Part Number | 480403 |
| Model | 480403 |
| Warranty | 1 year |
More information #ad
7. Trane
#adAmerican Standard & Trane 4TEE3F39A1000AA OEM Factory Replacement ECM Motor Module
#adMore information #ad
For ecm surge protector, see link - https://www. Amazon. Com/dp/b009ax6mly?ref=myi_title_dp.| Brand | Trane #ad |
| Manufacturer | Trane #ad |
| Height | 6 Inches |
| Length | 8 Inches |
| Weight | 3 Pounds |
| Width | 6 Inches |
| Part Number | MOD02177-574 |
| Model | MOD02177-574 |
More information #ad
8. Zebra Instruments
#adZebra Instruments, Zebra Stat, Analyzer, Remote Control & Multi-Mode Tester ZS-2
#adZebra Instruments #ad - Zebrastat monitors voltage levels, displaying it as oK - Questionable - or Low. Zebrastat will act as an automatically-resetting circuit breaker, temporarily replacing a system fuse while looking for ‘shorted’ lines or components.More information #ad
Zebrastat performs immediate continuity checks on up to six circuits at a time. Factory only available from Airstar Supply, the ONLY Approved Zebra Instruments Vendor. Zebrastat reports signal levels on control lines - visually displaying them. Zebrastat acts as a remote control, saving you steps from attic, roof, or basement.| Brand | Zebra Instruments #ad |
| Manufacturer | Zebra Instruments #ad |
| Part Number | ZS-2 |
| Model | ZS-2 |
More information #ad
