As an Amazon Associate I earn from qualifying purchases.
Max amps: 100a per block, mounting :#8 m4 screw, screw terminal torque: 18in-lb, 30a per circuit, positive bus: #10-32 stud, Negative bus: #10-32 stud, max volts: 32v DC, Recommended Stud torque: 24 in-lb, Screw terminal type: #8-32 screws with captive star lock washer.
Weewooday #ad - Quality material: the transparent protective cover is made of PC material, and the black base is made of nylon, which has good strength and durability, and it is not easily affected in villainous weather.4. 7 x 08 x 1.
6 inch/ 12 x 2 x 4 cm. Wide application: 6 terminal bus bar can be widely applied for car, boat, marine, caravan and so on, and it can provide a clean and smooth surface for most installation. What you will get: the package contains 1 set of 6 terminal bus bar, 1 piece of transparent protective cover, including 1 piece of contact board, 2 pieces terminal studs and 6 pieces terminal screws, and the size of the terminal bus bar is approx.
Important parameters: 6 terminal bus bar max voltage: 300 v ac/48 v dc; Continuous rating: 130 A DC / 150 A DC; Terminal stud: M6; Terminal screw: M4. Good performance: the busbar contact plate is made of -plated copper, good conductivity and corrosion protection performance, which has low resistance, the busbar block with nice performance provide you and your family with a safe use.
1. Blue Sea Systems
#ad2315, Blue Sea Systems 100 Amp Mini BusBar with 4 studs and a cover
#adBlue Sea Systems #ad - 100a mini busbar with 4 studs and a cover part number 2315. Max voltage: 300v ac/ 48v dc, continuous Rating: 100A AC/DC. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity and corrision resistance, cover made with clear polycarbonate.More information #ad
Terminal studs: 4 x #10-32. 2 mounting holes accept #10 M5 screws.| Brand | Blue Sea Systems #ad |
| Manufacturer | BLW6A #ad |
| Height | 1 Inches |
| Length | 4 Inches |
| Weight | 0.17 Pounds |
| Width | 1 Inches |
| Part Number | 2315 |
| Model | 2315 |
| Warranty | LIMITED WARRANTY |
More information #ad
2. Blue Sea Systems
#ad1/4, Blue/Sea, Blue Sea Systems DualBus Plus 150A BusBar
#adBlue Sea Systems #ad - Dual bus plus 150a busbar - 1/4 inch -20 stud 5 gang. Number of screw Terminals: 5 per bus. Number of terminal Studs: 2 per bus. Affordable parts.More information #ad
| Brand | Blue Sea Systems #ad |
| Manufacturer | Acr Electronics #ad |
| Height | 2 Inches |
| Length | 8 Inches |
| Weight | 0.5 Pounds |
| Width | 4 Inches |
| Part Number | 2722 |
| Model | 2722 |
| Warranty | Manufacturer Warranty |
More information #ad
3. Blue Sea Systems
#adBlue Sea Systems PowerBar 600A BusBar with Four 3/8, Beige 2104
#adBlue Sea Systems #ad - Continuous rating: 545A AC/ 600A DC. Reinforced polycarbonate base with tin plated pure electrical copper for maximum conductivity. Max voltage: 300vaC/ 48VDC. 600a powerbar with four 3/8" terminal studs. 4 mounting holes accept 1/4" screws.More information #ad
| Brand | Blue Sea Systems #ad |
| Manufacturer | Acr Electronics #ad |
| Height | 7 Inches |
| Length | 2 Inches |
| Weight | 0.77 Pounds |
| Width | 5.5 Inches |
| Part Number | 2104 |
| Model | 2104 |
| Warranty | LIMITED WARRANTY |
More information #ad
4. Blue Sea Systems
#ad6 Circuits with Negative Bus and Cover , 3.32'' x 4.89'', Blue Sea Systems 5025 ST Blade Fuse Block
#adBlue Sea Systems #ad - Accepts ring or spade type terminals and ATO/ATC fast acting blade fuses - fuses sold separately. Positive distribution bus with #10-32 stud. Includes 20 write on circuit labels.Max amps: 100a per block, mounting :#8 m4 screw, screw terminal torque: 18in-lb, 30a per circuit, positive bus: #10-32 stud, Negative bus: #10-32 stud, max volts: 32v DC, Recommended Stud torque: 24 in-lb, Screw terminal type: #8-32 screws with captive star lock washer.
More information #ad
Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements and has a push button latch that is easy to open. Blue sea systems fuse block st blade 6 circuit with Ground and Cover, part number 5025, can be used for 24-hour circuits.| Brand | Blue Sea Systems #ad |
| Manufacturer | Acr Electronics #ad |
| Height | 8 Inches |
| Length | 2 Inches |
| Weight | 0.55 Pounds |
| Width | 4 Inches |
| Part Number | 5025-BSS |
| Model | 5025-BSS |
More information #ad
5. Weewooday
#adWeewooday 10-Gang BusBar with Cover 6 Terminal Bus Bar 150 A BusBar Block with Cover Power Distribution Terminal Block W/ 6 Pieces M4 Screws 2 Pieces M6 Studs for Caravan Car Boat Marine
#ad6 inch/ 12 x 2 x 4 cm. Wide application: 6 terminal bus bar can be widely applied for car, boat, marine, caravan and so on, and it can provide a clean and smooth surface for most installation. What you will get: the package contains 1 set of 6 terminal bus bar, 1 piece of transparent protective cover, including 1 piece of contact board, 2 pieces terminal studs and 6 pieces terminal screws, and the size of the terminal bus bar is approx.
More information #ad
Important parameters: 6 terminal bus bar max voltage: 300 v ac/48 v dc; Continuous rating: 130 A DC / 150 A DC; Terminal stud: M6; Terminal screw: M4. Good performance: the busbar contact plate is made of -plated copper, good conductivity and corrosion protection performance, which has low resistance, the busbar block with nice performance provide you and your family with a safe use.
| Brand | Weewooday #ad |
| Manufacturer | Weewooday #ad |
| Part Number | Weewooday-Color-XP1 |
More information #ad
6. BEP
#adMarinco Power Products 650A 5 Stud Buss Bar
#adBEP #ad - Secure cover attachment does not interfere with cabling. Radiused ends improve cable routing. Snap-out skirts for flexible cable entry. Compact footprint saves space. Clear, polycarbonate covers insulate and protect on three sides.More information #ad
| Brand | BEP #ad |
| Manufacturer | Marinco Electrical Group #ad |
| Height | 2 Inches |
| Length | 8 Inches |
| Weight | 1.1 Pounds |
| Width | 7 Inches |
| Part Number | 777-BB5S-650 |
| Model | 777-BB5S-650 |
More information #ad
7. Blue Sea Systems
#ad285 Series & Klixon Circuit Breakers, Blue Sea Systems 187 Series, Panel Mount, 285 Series, 100A DC
#adBlue Sea Systems #ad - Drop in replacement for 185-Series Circuit Breakers. Terminal size: 1/4" Ring Terminal. Visible reset lever shows open condition. Trip free design cannot be held "ON" during fault current condition. Max voltage: 48v dc, interrupt Capacity: 3000A @ 48V.More information #ad
| Brand | Blue Sea Systems #ad |
| Manufacturer | Blue Sea Systems #ad |
| Height | 2 Inches |
| Length | 9 Inches |
| Weight | 0.11 Pounds |
| Width | 5 Inches |
| Part Number | 7087 |
| Model | 7087 |
More information #ad
8. Blue Sea Systems
#adBlue Sea Systems The Amazing Quality Blue Sea 2300, 150 Ampere Common BusBar 10 x #8-32 Screw Terminal w/Cover
#adBlue Sea Systems #ad - Offers premium quality at outstanding saving. 100% satisfaction. More for the money with this high quality Product. Excellent product.More information #ad
| Brand | Blue Sea Systems #ad |
| Manufacturer | Blue Sea Systems #ad |
| Height | 8.94 Inches |
| Length | 1.65 Inches |
| Weight | 1.3 Pounds |
| Width | 2.81 Inches |
| Part Number | na |
| Model | 2300 |
More information #ad
9. Blue Sea Systems
#ad4 Circuit Terminal Block, Blue Sea Systems 30A
#adBlue Sea Systems #ad - Closed back design completely insulates power from the mounting surface. 4 circuit 30 amp ac/dc 600v ac/DC Terminal Block. Jumpers allow creation of common circuits sold separately. Each screw pair is one isolated circuit.More information #ad
| Brand | Blue Sea Systems #ad |
| Manufacturer | Blue Sea Systems #ad |
| Height | 2 Inches |
| Length | 8 Inches |
| Weight | 0.09 Pounds |
| Width | 2 Inches |
| Part Number | 2504-BSS |
| Model | 2504-BSS |
More information #ad
