Top 9 Keymod Rail Section FDE – Hunting Equipment

As an Amazon Associate I earn from qualifying purchases.

1. TRIROCK

#ad

Trirock 5-Pack TAN/FDE keymod Picatinny Rail Sections kit fits Key mod handguard Rail Mount System, 5,7,9,11,13 Slots

#ad
TRIROCK #ad - With the protrusions design at the bottom to bolt-on the keymod holes, it could perfectly prevent the rail sections from sliding off while firing.

Curve edge design provides a safeguard to avoid any scratching damage to your rifle, flashlight, scope or rail section itself. Built in 1913 mil spec picatinny mounting rail allows mounting of most any weaver/picatinny based scope, red dot and other aiming devices. This keymod rail section kit is designed for fitting keymod handguard rail mount system. Cnc precision machined from high grade quality Aircraft Grade 6061-T6 Aluminum by Mil-Spec hard coated TAN/Flat dark earth finish. Most important, it can prevent the hands from scratching when operating.
BrandTRIROCK #ad
ManufacturerFoshan Aplus #ad
Height0.79 Inches
Length5.12 Inches
Weight0.35 Pounds
Width2.36 Inches

2. BRAVO COMPANY

#ad

BRAVO COMPANY BCM Keymod Nylon Picatinny Rail Section, Flat Dark Earth, 3"

#ad
BRAVO COMPANY #ad - 3-inch 5 slot. Self-contained assembly. Snag resistant design. Made to the mil-standard 1913 Picatinny arsenal specifications.
BrandBRAVO COMPANY #ad
ManufacturerGun Accessory Supply #ad
Part NumberBCM-KMR-1913-N3-FDE
ModelBCM-KMR-1913-N3-FDE

3. TuFok

#ad

Low Profile Tan Picatinny Rail Mount, Keymod Rail Attachment MountAluminum,3-Slot,Tan, TuFok Picatinny Rail Section Keymod

#ad
TuFok #ad - Fit keymod systemcompatible with standard keymod handguard system, magnifiers, attach to keymod accessories such as scopes, red dots. Also fit for biopod mounting.

Low profilethe hight of picatinny rail mount is extremely thin, ONLY 027 inch/6. 88mm. High quality material made of durable mil-spec aluminum alloy with matte finish. Unique designthe key mod aluminum picatinny rail screws are unique-designed by ourselves independently. Lightweightkeymod picatinny Adapter weights only 035oz/10g. Will not add extra load to your firearms. Fits like a glove. They look like small version of M lok rail screws while holding on tight and much easier to install. All necessary screws, locking nuts and hex wrench are included in the package.
BrandTuFok #ad
ManufacturerTuFok #ad
Part NumberQX-TFK008-TAN

4. MGP CQB

#ad

MGP CQB Mloks Polymer Picatinny Rail Slots, 5-Slot 7-Slot 9-Slot 11-Slot 13-Slot Lightweight Rail Section Accessories-5 PiecesFDE

#ad
MGP CQB #ad - Made of durable polymer material with, Super Lightweight Rails, With Solid Structure. Compatible with any standard mmloks systems´╝îpicatinny accepts All Standard Picatinny Accessories.

Note: these picatinny rails & Nuts are suitable for MMlOKs systems, Not for KKeymods systems. Pack of 5-slot 7-slot 9-slot 11-slot 13-slot solid Rails, 10 Sets Locking Nuts and 1 Pcs Wrench. Available in five kinds lengths, so you can position just enough rail area exactly where you need it for each accessory. The mmloks polymer rail sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, Scopes, Optics, etc. Install these screws by come with wrench tool, 10 sets matched screws, simple to install or Remove.
BrandMGP CQB #ad
ManufacturerMC002 #ad

5. Active-8

#ad

13-Slot Lightweight Aluminum Weaver Rail Section Accessories for Keymod Rail System, Active-8 Keymod Picatinny Rail

#ad
Active-8 #ad - Built tough - engineered out of t6-6061 aluminum to ensure your most expensive and integral equipment remains safely secured when you need it most.

Ideal for attaching kinds of tactical Accessories Such as Flashlights, Laser, Bipods, Optics, or Other Accessories. Designed also feature beveled ends to reduce snagging and eliminate sharp corners and edges, Keymod Picatinny Accepts Any Standard Picatinny Accessories. Maximize performance - low profile design paired with smoothly rounded snag free edges gives you all the benefits of added modularity without the draw backs of unnecessary bulk and weight. Available in five kinds lengths, so you can position just enough rail area exactly where you need it for each accessory.
BrandActive-8 #ad
ManufacturerFoshan Solin Metal Products CO.,LTD #ad

6. Anovo

#ad

3-5-7-9-11-13 Slots Aluminum Picatinny Rails Section for Keymod System with 13 T-Nuts & 13 Screws & 6 Allen Wrench, Anovo Picatinny Rail Set for Keymod System

#ad
Anovo #ad - Wide compatibility: our keymod picatinny rails with standrant specification allowing you add on any standard 21mm Picatinny accessories. Premium aircraft aluminum: precision machined out of solid structure aircraft aluminum alloy and high strength steel in black matte coating anodizing finish with shiney.

Such as flashlights, red green dot sights, iron sight, or other more tactical accessories. Durable but lightweight material: 13-slots weight 1. 42oz, 7-slots 078oz, 3-slots 032oz, 5-slots 056oz, 11-slots 1. 12oz, 9-slots 090oz, not only offer durable safe but also lightweight performance in the field.

Simple to install: install screws by allen wrench tool, easy to install or remove. Keymod lock system and once tightened they have not shaken loose. Multi-size rail pack: pack of 13-slots, 13 sets locking t-nuts included a couple extra screw and T-nuts set and 6 Pcs Allen Wrench, 5-slots, 13 sets matched screws, 11-slots, 3-slots picatinny rails, 9-slots, 7-slots, perfect for customizing shooting!.
BrandAnovo #ad
ManufacturerAnovo #ad

7. UTG Pro

#ad

FDE Cerakote, UTG PRO 4-Slot M-LOKR Picatinny Rail Section

#ad
UTG Pro #ad - Includes m-lok steel locking nuts, steel Allen screws, and Allen wrench for installation. 1. 57 inch in length and featuring a continuous rail edge designed to provide a monolithic look and function when placing rail sections side by side. Proudly designed and made in USA, precision Machined from aircraft grade aluminum alloy with a flat dark earth Cerakote finish. Features optimal 037 inch saddle height profile for versatile attaching of accessories for a myriad of different modular applications. 4-slot m-lok picatinny rail Section fully compatible with any m-lok mounting platform.
BrandUTG Pro #ad
ManufacturerLeapers, Inc. #ad
Height1 Inches
Length4 Inches
Weight0.04 Pounds
Width2.75 Inches
Part NumberMTURS09SD
ModelMTURS09SD

8. Monoki

#ad

5-Slot 7-Slot 13-Slot Lightweight Picatinny Rail Section for Keymod Handguard Mount Rail System with 3 Allen Wrench & Solid-Style, Monoki Picatinny Rail Sections for Keymod, 3 Pack 5/7/13-Slot

#ad
Monoki #ad - Made of durable mil-spec aluminum alloy material with black matte finish. Pack of 5-slot, 7 sets matched screws, 13-slot solid rails, 7-slot, 7 sets locking nuts and 3 sets allen wrench. Compatible with any standard keymod mounting system, picatinny accepts all standard picatinny accessories. Note: these picatinny rails & nuts are only suitable for keymod systems. Add more accessories with these rails, bipods, forward grips, perfect for attaching picatinny flashlights, sights, or other accessories. Super lightweight rails with solid structure for keymod, 13-slot weights only 1. 83oz.
BrandMonoki #ad
ManufacturerMonoki #ad
Part NumberB074TZKZVH

9. UTG Pro

#ad

UTG PRO 8-Slot M-LOKR Picatinny Rail Section, FDE CerakoteR

#ad
UTG Pro #ad - 3. 14 inch in length and featuring a continuous rail edge designed to provide a monolithic look and function when placing rail sections side by side. Proudly designed and made in USA, precision Machined from aircraft grade aluminum alloy with a flat dark earth Cerakote finish. Features optimal 037 inch saddle height profile for versatile attaching of accessories for a myriad of different modular applications. Includes m-lok steel locking nuts, steel Allen screws, and Allen wrench for installation. 8-slot m-lok picatinny rail Section fully compatible with any m-lok mounting platform.
BrandUTG Pro #ad
ManufacturerLeapers, Inc. #ad
Height0.5 Inches
Length5.5 Inches
Weight0.07 Pounds
Width2.6 Inches
Part NumberMTURS09MD
ModelMTURS09MD