TotalBoat Polyester Laminating Resin Gallon

#ad
Jamestown Distributors #ad - Compare to 3m fiberglass resin, system three silvertip, Mas Epoxies Flag Epoxy Resin, Evercoat Laminating Resin, and West System 105 Epoxy Resin. Mekp hardener is included for the final coat. Used extensively in composite construction, especially boat repair and building. This economical laminating resin is ideal for first or base coat applications.

All totalboat products are developed by boaters, for boaters. Unlike many other laminating resins, no sanding is required between coats decreasing work and time. Available in Quart and Gallon sizes. Excellent for saturating fiberglass fabrics. Quart and gallon sizes available. No sanding between coats. Excellent base coat for laminating applications.

TotalBoat Polyester Laminating Resin Gallon #ad - Totalboat polyester laminating Resin was engineered without wax in order to enable a tack to hold composites in place, even vertically. Remains tacky to hold fiberglass and other composite cloth in place. Great for wet-out of fiberglass and other composites when building or fixing boats, surfboards, automotive molds, and other molds.

#ad



TotalBoat Gelcoat White, Quart with Wax

#ad
Jamestown Distributors #ad - Always mix colorant thoroughly into the gelcoat before adding MEKP. If thinning, use styrene, not acetone. Of wax Additive. Totalboat gelcoats can also be tinted to achieve a desired color. In warmer conditions or for added working time, add 1% MEKP. 100% made in the USA. White gelcoat is available in quart and gallon sizes; NEUTRAL GELCOAT COMES IN QUART SIZE ONLY.

Of wax additive, 32 oz. For white gelcoat, use up to 1% gelcoat colorant. Of gelcoat w/o Wax = 1/4 oz. Premium isophthalic npg polyester gelcoat is more durable than standard orthophthalic gelcoat for a variety of boat building and gelcoat surface repair projects. Of gelcoat w/o Wax = ½-1 oz. Totalboat gelcoat provides an exceptionally smooth finish and is a better value.

TotalBoat Gelcoat White, Quart with Wax #ad - If applying to a mold, use a mold release agent first. In cooler conditions, add up to 3% MEKP. Of gelcoat w/o Wax = 2-4 oz. If applying over totalboat totalfair epoxy fairing compound, apply TotalBoat 2-Part Epoxy Primer or TotalProtect before applying Gelcoat. Totalboat gelcoats create a super-smooth, high-gloss finish on top of fiber-reinforced composites.

For neutral gelcoat, light green, purple, red, add 10% polyester resin or gelcoat colorant 12% for yellow, & orange.

#ad



TotalBoat Polyester Finishing Resin Gallon

#ad
Jamestown Distributors #ad - Contains wax to allow for proper curing. Engineered with a medium viscosity, the resin minimized dripping and sagging of product on vertical surfaces. 1 bottle of mekp methyl ethyl ketone peroxide hardener is included with the quart or gallon of marine finishing resin. Formulated for beautiful results with spray-up and hand layup techniques.

Non-sagging, high-viscosity formula has an easily controlled setup time, is easy to apply, and has great coverage. Cured gelcoat sands easily and polishes to a durable, high-gloss finish. Compatible with gelcoat coloring agents made specifically for polyester resin or gelcoat. Available in white & neutral, with or without wax.

TotalBoat Polyester Finishing Resin Gallon #ad - Cures clear, and tack-free over composites, wood, sandable, and metal. Easy to mix and sets up well with medium viscosity to prevent sagging on vertical surfaces. High quality two-part polyester finishing resin also called surfboard resin is used extensively for marine repairs and restoration. Save working and curing time as well as money with TotalBoat Polyester Finishing Resin.

All totalboat products are developed by boaters, for boaters. Includes MEKP catalyst. Polyester finishing resin for repairs and building.

#ad



Resin & Epoxy Compatible - Chopped Strand Mat 50" x 360" 1.5 Oz - Nordstrand Fiberglass Cloth Roll - E-Glass Fiber Glass Sheet CSM GRP for Molding Casting Roofing Boat Marine Repair

#ad
Nordstrand fgm-450a-diy05 #ad - Includes MEKP hardener. The roll is 50in x 30ft with a weight of 1. 5oz per square foot. Cures clear, sandable, and tack-free over composites, wood, and metal. Easy to mix and sets up well with medium viscosity to prevent sagging on vertical surfaces. Premium quality cloth with E-glass strands, ideal for molding and mold making.

It can be used with epoxy, polyester or vinyl ester resin, including West Systems epoxy. Marine grade fiberglass chopped strand mat by Nordstrand. The mat is made of high quality E-glass strands. The roll is 50in x 30ft with a weight of 1. 5oz per square foot. Working with fiberglass can be hazardous: be sure to work in a well-ventilated area and wear appropriate protective clothing.

Resin & Epoxy Compatible - Chopped Strand Mat 50" x 360" 1.5 Oz - Nordstrand Fiberglass Cloth Roll - E-Glass Fiber Glass Sheet CSM GRP for Molding Casting Roofing Boat Marine Repair #ad - It is quick to wet through and has high absorption. Description premium fiberglass mat This Fiberglass Chopped Strand Mat is marine grade and suitable for boat building and repairs, roofing, pond lining and many other applications. This chopped strand mat has a good wet out. Molds made from this fiberglass mat will be equally stiff in all directions.

Delivered ready to use this Fiberglass Chopped Strand Mat is packaged as a roll folding can damage the fibers. Contains wax to allow for proper curing.

#ad



TotalBoat TotalFair Epoxy Fairing Compound 2 Quart Kit | Marine Repair Putty for Fairing, Filling & Shaping

#ad
Jamestown Distributors #ad - Formulated for beautiful results with spray-up and hand layup techniques. Non-sagging, high-viscosity formula has an easily controlled setup time, is easy to apply, and has great coverage. Cured gelcoat sands easily and polishes to a durable, high-gloss finish. Compatible with gelcoat coloring agents made specifically for polyester resin or gelcoat.

Available in white & neutral, with or without wax. The roll is 50in x 30ft with a weight of 1. 5oz per square foot. Use above or below the waterline on fiberglass, wood, steel, cast iron, aluminum & more. Marine filler available in a 2-pint kit, 2-Quart Kit, for smooth, swirl, pinhole, and a Gallon Kit, and void-free surfaces.

TotalBoat TotalFair Epoxy Fairing Compound 2 Quart Kit | Marine Repair Putty for Fairing, Filling & Shaping #ad - Includes MEKP hardener. At 80°f, totalfair is sandable in just 3 hours. Contains wax to allow for proper curing. Totalboat totalfair is a lightweight two-component marine epoxy repair putty that can be used for fairing, shaping, filling, and repair. Marine grade fiberglass chopped strand mat by Nordstrand. Very easy to sand smooth once cured.

Apply totalboat 2-part epoxy Primer or TotalBoat TotalProtect Barrier Coat before applying Gelcoat.

#ad



3 Yards X 50" Wide for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins - 1.5 Oz. Fiberglass Chopped Strand Mat

#ad
Griffco Products LLC #ad - Can be used in a variety of hand lay-up applications with epoxy, polyester and vinyl ester resins. Includes MEKP catalyst. Polyester finishing resin for repairs and building. Suitable for boat building, casting, marine repairs, insulation, roofing, lining and more. Can be used with epoxy, polyester or vinyl ester resin including West Systems epoxy.

Used in the transportation, recreation, marine and construction industries. Premium quality cloth with E-glass strands, ideal for molding and mold making. Marine grade fiberglass chopped strand mat by Nordstrand. Available in quart and Gallon sizes. Formulated for beautiful results with spray-up and hand layup techniques.

3 Yards X 50" Wide for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins - 1.5 Oz. Fiberglass Chopped Strand Mat #ad - Non-sagging, is easy to apply, high-viscosity formula has an easily controlled setup time, and has great coverage. Cured gelcoat sands easily and polishes to a durable, high-gloss finish. Compatible with gelcoat coloring agents made specifically for polyester resin or gelcoat. Available in white & neutral, with or without wax.

May be sanded in as little as 3 hours at 80°F. Uniform strength and stiffness in all directions.

#ad



TotalBoat Polyester Fairing Compound Quart Kit

#ad
Jamestown Distributors #ad - It's easy to maintain a feathered edge while sanding thick or thin areas, so with very little effort and very few sandpaper change-outs you get a perfectly smooth, pinhole-free surface that's ready for paint or gelcoat. This lightweight cosmetic filler also has minimal shrinkage and less odor than traditional polyester fairing compounds.

Available in quart and Gallon sizes. Use to build thickness - about 1/22" or. 045" per layer. Use above or below the waterline on fiberglass, wood, cast iron, steel, aluminum & more. Marine filler available in a 2-pint kit, 2-Quart Kit, swirl, for smooth, pinhole, and a Gallon Kit, and void-free surfaces. Use for "print through" barrier between gel coat and woven roving.

TotalBoat Polyester Fairing Compound Quart Kit #ad - Suitable for boat building, roofing, insulation, marine repairs, casting, lining and more. Can be used with epoxy, polyester or vinyl ester resin including West Systems epoxy. Repair dents, filling, gouges, chips, cracks & other surface imperfections. Easy to use: 1 to 1 mix ratio by volume that changes to a green color when the individual blue and yellow components are properly mixed.

Totalboat polyester Fairing Compound drags smoothly, sets up fast, and sands like a dream. In as little as 30 minutes, it cures to a hard material with optimal strength and easy sanding ability.

#ad



Fiberglass Roller Tools Kit, 3pcs Fiberglass Resin Laminating Bubble Roller Set for Tub Shower Bathtub Boat Repair

#ad
Lanpn #ad - Very easy to sand smooth once cured. Formulated for beautiful results with spray-up and hand layup techniques. Non-sagging, is easy to apply, high-viscosity formula has an easily controlled setup time, and has great coverage. Cured gelcoat sands easily and polishes to a durable, high-gloss finish. Compatible with gelcoat coloring agents made specifically for polyester resin or gelcoat.

Available in white & neutral, with or without wax. Use above or below the waterline on fiberglass, cast iron, wood, steel, aluminum & more. Marine filler available in a 2-pint kit, 2-Quart Kit, for smooth, swirl, pinhole, and a Gallon Kit, and void-free surfaces. Use for "print through" barrier between gel coat and woven roving.

Fiberglass Roller Tools Kit, 3pcs Fiberglass Resin Laminating Bubble Roller Set for Tub Shower Bathtub Boat Repair #ad - Resists scratches and staining. Cures clear, and tack-free over composites, wood, sandable, and metal. Easy to mix and sets up well with medium viscosity to prevent sagging on vertical surfaces. Package includes: 3pcs fiberglass roller tools set Premium isophthalic npg polyester gelcoat is more durable than standard orthophthalic gelcoat for a variety of boat building and gelcoat surface repair projects.

Use to build thickness - about 1/22" or. 045" per layer. Includes MEKP catalyst.

#ad



Yosoo Fiberglass Paddle Roller Kit Set, Bubble Buster Roller Tool 3 Pcs Fiberglass Laminating Bubble Roller Kit for Mold Resin Composite Tub Shower Bathtub Boat Repair

#ad
Yosoo Bubble Paddle Tool #ad - Suitable for boat building, roofing, casting, insulation, marine repairs, lining and more. Can be used with epoxy, polyester or vinyl ester resin including West Systems epoxy. Available in quart and Gallon sizes. Mekp catalyst is included. The fiberglass roller tools set is a proper balance of glass and resin with no air pockets.

Contains wax to allow for proper curing. Protect your protect --it also can effectively improve the labor efficiency and product quality. Material: adopt of aluminum alloy materials and made by machining, a precise balance of glass and resin with no air pockets, durable and sturdy to use. Due to the hand measurement, there have size error about 1-2cm.

These aluminum rollers set the industry standard for durability and ease of cleaning. Improving working efficiency --in the process of products, it can save resin, save time and costs, improving construction efficiency. White gelcoat is available in quart and gallon sizes; NEUTRAL GELCOAT COMES IN QUART SIZE ONLY.

Yosoo Fiberglass Paddle Roller Kit Set, Bubble Buster Roller Tool 3 Pcs Fiberglass Laminating Bubble Roller Kit for Mold Resin Composite Tub Shower Bathtub Boat Repair #ad - Includes MEKP catalyst. Polyester finishing resin for repairs and building. 3pcs fiberglass roller set: 1x larger diameter which has deeper grooves for thicker laminate roll-out, 1x smaller diameter relieves more numerous small bubbles on a thinner laminate, 1x corner roller for air relief in crucial filets and corners.

Use as a bond layer between layers of woven roving.

#ad



TotalBoat Dewaxer & Surface Prep Gallon

#ad
Jamestown Distributors #ad - Function: used for removing air bubbles from lamination, leveling and compaction of resin coating to drive bubbles, and you just never know when you can use a random tool for something other than the designed purpose to save the day. Application: widely used in the production of glass fiber reinforced plastic, and the inner surface of the bubble roller puncture.

Perfect for cleaning and dewaxing fiberglass and steel surfaces like boat bottoms. Repair dents, filling, chips, gouges, cracks & other surface imperfections. Easy to use: 1 to 1 mix ratio by volume that changes to a green color when the individual blue and yellow components are properly mixed. Completely removes surface contaminates such as wax, oil, grease, and mold.

TotalBoat Dewaxer & Surface Prep Gallon #ad - Repurpose solvent for cleaning painting tools and work area. The marine dewaxer and painting preparation solvent is available in quarts and gallons. Premium quality cloth with E-glass strands, ideal for molding and mold making. Removing surface contaminates such as mold, wax, grease and oil from all fiberglass and steel surfaces.

Lightweight, 2-part polyester filling and fairing compound for cosmetic repairs on gelcoat, fiberglass, and other composite surfaces above the waterline. Butter consistency spreads smoothly to a feathered edge, and won't sag on vertical surfaces. Sets up quickly, with minimal shrinkage, and sands easily.

#ad



1708 Fiberglass 45/45 DBM Biaxial 50" Inch Wide - 1 Yard - 3 FEET Long

#ad
1708x50x3 #ad - Uniform strength and stiffness in all directions. Very easy to sand smooth once cured. Excellent sag resistance for application to overhead, vertical or inclined surfaces. May be sanded in as little as 3 hours at 80°F. Premium quality cloth with E-glass strands, ideal for molding and mold making. Function: used for removing air bubbles from lamination, leveling and compaction of resin coating to drive bubbles, and you just never know when you can use a random tool for something other than the designed purpose to save the day.

Application: widely used in the production of glass fiber reinforced plastic, and the inner surface of the bubble roller puncture. Perfect for cleaning and dewaxing fiberglass and steel surfaces like boat bottoms. Note: comes folded as ahown. Resists scratches and staining. Cures clear, wood, and tack-free over composites, sandable, and metal.

1708 Fiberglass 45/45 DBM Biaxial 50" Inch Wide - 1 Yard - 3 FEET Long #ad - Easy to mix and sets up well with medium viscosity to prevent sagging on vertical surfaces. Lightweight 2-part epoxy putty for fairing, and shaping. Marine parts and accessories offers 1708 inspected and packed bY PROFESSIONAL BOAT BUILDERS. Material: adopt of aluminum alloy materials and made by machining, a precise balance of glass and resin with no air pockets, durable and sturdy to use.

#ad